Need help?Do you have a question about the Mhouse SL1S and is the answer not in the manual?
General| Type | Sliding Gate Opener |
|---|---|
| Max Gate Weight | 400 kg |
| Max Gate Length | 6 m |
| Power Supply | 230V AC |
| Motor Voltage | 24V DC |
| Operating Temperature | -20°C to +50°C |
| Protection Class | IP44 |
| Maximum Gate Weight | 400 kg |
| Maximum Gate Width | 6 m |
| Protection Degree | IP44 |
| Control Type | Remote Control |
| Number of Remote Controls | 2 |
Instructions for safe installation, including symbols for potential hazards.
Ensures the gate's mechanical structure and environment are suitable for automation.
Step-by-step guide for installing the gearmotor on a gate without an existing rack.
Instructions for installing the gearmotor on a gate that already has a rack.
Detailed instructions for mounting and connecting the PH100 photocells.
Explains how to connect various devices to the gearmotor's control unit.
Instructions for connecting the automation to the electrical mains safely.
Procedure for the control unit to learn connected devices.
Verifying the gate leaf movement and limit switch settings.
Performing system tests to ensure safety and correct operation.
Final checks and documentation required before handing over the system.
Detailed guide to setting control unit parameters using the radio transmitter.
Procedures for adding or removing devices from the automation system.
Details how to connect devices to the STOP input for immediate shutdown.
Procedure to relearn devices connected to ECSBus and STOP input.
How to memorize radio transmitters for controlling the automation.
Table of probable causes and solutions for common malfunctions.
Essential safety guidelines for users operating the automated gate.
Procedure for manual operation of the gate in case of power failure or malfunction.
Procedure for manual operation of the gate in case of power failure or malfunction.
To Next Page
