Need help?Do you have a question about the Mi Mop 2 Pro and is the answer not in the manual?
General| Suction Power | 3000 Pa |
|---|---|
| Battery Capacity | 5200 mAh |
| Water Tank Capacity | 250 ml |
| Navigation System | LDS Laser Navigation |
| Navigation | LDS Laser Navigation |
| Charging Time | 4 hours |
| Max Speed | 0.3 m/s |
| Connectivity | Wi-Fi |
| Control | Voice Control |
General usage limitations and safety advice for the vacuum-mop.
Guidelines for handling hazardous battery substances and proper recycling procedures.
Details all included accessories for the Xiaomi vacuum-mop.
Diagrams labeling the vacuum-mop's top and bottom components and sensors.
Explains the operation of power/dock buttons and the meaning of LED indicator lights.
Instructions for positioning the charging dock and connecting it to power.
Guides on attaching the dust compartment and water tank for different modes.
How to fill the water tank, attach it, and cautions regarding its use.
Steps to connect the vacuum-mop to the Mi Home mobile application.
How to turn the device on/off and initiate the quick map creation process.
Details on mopping modes, pausing/resuming cleaning, and adding water during tasks.
Saving maps, edge cleanup, zoned cleanup, and setting virtual walls.
Explanation and settings for the do-not-disturb mode.
Instructions for cleaning the dust compartment and its filter.
How to clean and replace the main brush, side brush, and caster wheel.
Procedures for periodically cleaning the cliff and edge infrared sensors.
Solutions for errors related to laser, cliff, collision sensors, and component installation.
Troubleshooting steps for low battery issues and the robot being tilted.
Technical specifications for the robot and its charging dock, including connectivity.
Information on the proper disposal of waste electrical and electronic equipment.
To Next Page
