14
4. Rotate the brush holders until the alignment mark on each holder is aligned
with the unlocking mark, and then remove the brush holders from both ends of
the brush.
5. Use the blade of the cleaning tool to cut the hair tangled on the brush and
thoroughly clean the brush.
6. Reinstall the brush holders and the brush bushing.
7. Reinstall the brush and the brush cover, and press the brush cover securely
into place.
Cleaning the brush
Cut hair Remove dirt and debris
Note: It is recommended to replace the brush every 6–12 months for an optimal cleaning
effect.
Side Brush
1. Flip the vacuum-mop over and remove the screw that secures the side brush in
place.
2. Remove and clean the side brush.
3. Reinstall the side brush and tighten the screw.
Note: It is recommended to replace the side brush every 3–6 months for an optimal cleaning
effect.
Caster Wheel
1. Flip the vacuum-mop over and remove the caster wheel upwards.
2. Clean any hair, dirt, and debris from the caster wheel.
3. Reinstall the caster wheel.
To Next Page
Loading...
