Copyright © 2009-2022 Micca. All rights reserved. Page | 16
be disabled, the player’s Display Zoom setting can be used to adjust the horizontal and vertical
size of the display to fit the TV’s viewable area.
6.1.4 Display Rotation
The player can rotate its display output to accommodate displays that are mounted vertically or
inverted.
Available settings: 0, 90, 180, 270
6.1.5 Subtitle Display
The player can automatically display compatible subtitles found.
The player will automatically display compatible subtitle files found
The player will not automatically display subtitles.
6.1.6 Audio Output
Sets the format of the digital audio carried over the player’s HDMI output.
Audio is down-mixed into two channels for output over HDMI. Use this
setting if the TV or home theater receiver lacks multi-channel surround
sound decoding capabilities.
Audio is sent in its original format by the player. Use this setting if the
TV or home theater receiver has multi-channel surround sound
decoding capabilities.
6.1.7 Auto Play
The player can automatically begin playing media files from a USB drive or memory card. The
player will search the root folder and begin playing any compatible media files found there.
The auto play feature is off.
Enable auto play function for video files.
Enable auto play function for music files.
Enable auto play function for photo files.
Enable auto play function for video files, followed by photo files.
Enable auto play function for photo files with background music.
6.1.8 Video Resume
The player can remember the stopping point of recently played videos, with a prompt to resume
watching from the last stopping point when the video is selected for playback again.
Available settings: On, Off
6.1.9 Restore Default Settings
Resets settings back to factory default. To completely wipe and clear the player, perform a
firmware update. Please see ‘6.2 Firmware Updates’ for more information on performing
firmware updates.
To Next Page
Loading...
