Micca Speck G3 - Connections and Initial Setup; Basic Connections; Audio and Video Connections

Copyright © 2009-2022 Micca. All rights reserved. Page | 5
RETURN
Press to return to the previous screen when navigation menus.
Press to exit the current folder when browsing files.
DIRECTIONAL
KEYS
Navigate on-screen menu items to highlight items
OK/ENTER
Select or confirm the highlighted item
SUBTITLE
Toggle the subtitle on or off when playing videos
AUDIO
Change audio track when playing videos
REWIND and
FAST FORWARD
Press to skip backward or forward the current playback.
PLAY/PAUSE
Begin or pause playback
STOP
Stop playback
PREVIOUS and
NEXT
Press to go to the previous/next file during playback.
SETUP
Enter the settings menu to change player settings
AV
Switch to AV output mode, default is NTSC
HDMI
Switch to HDMI output mode, the player will automatically detect
and use the highest supported resolution for the connected TV.
MUTE
Mute audio output; press again to unmute.
VOL+/VOL
-
Change the output volume. (Hint: Set volume to max and use the
TV or AV receiver to control playback volume).
3 Connections and Initial Setup
3.1 Basic Connections
3.1.1 Connecting power
Only use the AC adapter that is supplied with the player. Connect the barrel connector of the AC
adapter to the player’s DC IN jack. The player will power on automatically whenever power is
connected. To turn the player off, use the POWER button on the remote control.
3.1.2 Connecting a USB Storage Device
Storage devices such as USB hard drives or flash drives can be connected to the player for
playback of media files. Plug in the USB device to one of the USB ports on the player. After
about 5-10 seconds, the USB drive will be detected and accessible by the player.
3.2 Audio and Video Connections
The player can be connected to a TV or home theater system using HDMI or composite AV
cable. For best results, use the HDMI connection if available, and use the AV connection only if
HDMI is not available.
3.2.1 HDMI Connection
For connection with a 4K TV or home theater system, use an HDMI 2.0 cable.
1) Plug one end of an HDMI cable (not included) to the player’s HDMI output jack and the
other end of the HDMI cable to an HDMI input jack on the TV or home theater receiver.