Copyright © 2009-2022 Micca. All rights reserved. Page | 17
6.1.10 Firmware Version
This setting displays the current firmware version.
6.2 Firmware Updates
To update the firmware, follow these steps:
1) Visit www.miccatron.com and download the latest firmware ZIP file.
2) Open the firmware ZIP file and extract the “update.zip” file onto the root directory (i.e. not
in any folders) of a USB drive. IMPORTANT: The USB drive must be formatted with
the FAT32 file system.
3) Plug the USB drive into an empty USB jack on the player. Remove all other USB drives
or SD cards from the player.
4) The player will prompt the user to install the firmware update. Confirm to begin the
firmware update.
5) Wait for the player to complete the firmware update. Please be patient as it may take
several minutes to complete, during which the screen may be blank or show “no signal”.
Do not interrupt the process or power off the player.
6) When finished, the player will display a message asking if the firmware “update.zip” file
should be deleted from the USB drive. Confirm to delete the firmware file.
To Next Page
Loading...
