9. Troubleshooting
10. Full SMS Commands List
Set Admin Number
Back to Factory Setting
admin123456+space+mobile number
with country code
begin123456
After sent this sms command, all your configuration
will be cleared and the device will get back to
factory default settings
The password just can be 6 digitals
After sent this sms command, the configurations
will be saved and the device will restart
Please add your country code as prefix
of the admin number
Restart rst
Please get the exact correct APN name from the
SIM card provider of the tracker, "cmnet" is China
Mobile's APN name
apn+123456+apn content
APN
Password Change
password+old password+space+
new password
If the SIM card operator doesn't have APN user,
then please ignore this configuration
If the SIM card operator doesn't have APN
password, then please ignore this configuration
apnuser+123456+space+content
apnuser+123456+space+content
Functions Command Format Explanation
Unable to connect to
tracking platform
Check the APN and settings.
Check whrther the data service of SIM card is enabled.
Check the balance of SIM card.
Tracker shows offline
Check whether external power is still connected.
Check if the vehicle entered netword blind area.
Check the balance of SIM card.
Type Use
Location drift
In area with poor GNSS signal (tall building around or
basement), drifting may happen.
Check whether vibration happens around to trigger the
accelerator.
Unable to locate
Make sure the top side facing upward without metallic things
shielded.
Make sure it’s not in area with no satellite coverage.
No command reply
Make sure command format is correct.
Vehicle may be in network blind area.
Make sure SIM card is well inserted and has SMS servi.
To Next Page
Loading...
