9
©2021 Micro-Air Corp May 20, 2021, revision 1.4
Initial setup instructions
Setting the heat sources
It is necessary to set up the heating sources prior to operating your thermostat. Press the
settings button on the main screen. Select the heating sources button on the settings
screen. Select furnace, Heat pump, or heat strip by pressing the icon. The red circle
with a line through it will disappear indicating the heat source is available. Heat pump and heat strip
cannot be selected together.
Connecting remotely
This thermostat may be operated remotely using either Bluetooth or WIFI. Apps may be loaded
from the Google Play store or Apple App store. The first time the app is opened, it will ask to create an
account. A WIFI connection on your smart device is necessary for this step. Create your account and
follow the prompts to connect your thermostat.
If a second user is going to use the thermostat remotely, they can use the same account and
password as the first user. Each thermostat can only be assigned to a single account.
To Next Page
Loading...
Need help?
General
