Need help?Do you have a question about the MICRO-EPSILON confocalDT 2421 and is the answer not in the manual?
General| Brand | MICRO-EPSILON |
|---|---|
| Model | confocalDT 2421 |
| Category | Controller |
| Language | English |
Explains document symbols like CAUTION, NOTICE, user action, and tips.
Provides critical safety warnings for electrical connections, handling, and fiber optics to prevent damage.
Defines the system's application in industrial environments for displacement and thickness measurement.
Outlines environmental conditions, protection classes, temperature, and humidity limits for operation.
Defines key technical terms and abbreviations used in the manual.
Provides guidelines for handling and connecting the optical fiber sensor cable to prevent damage.
Lists critical rules for handling connectors, cables, and optical fibers to avoid contamination and breakage.
Explains how to mount sensors using adapters and lists compatible sensor-adapter combinations.
Details the pin assignments and functions for analog output, digital I/O, and power terminals.
Describes the RS422 interface characteristics, termination, and pin assignments.
Explains the status indicated by LEDs for Power, Status, Intensity, and Range sensors.
Explains the functions and actuation times of the controller's multifunction button.
Defines the Start of Measuring Range (SMR) as the minimum sensor-to-target distance.
Details initial system readiness, warm-up time, and IP address querying using sensorTOOL.
Instructions on connecting to the controller via its web interface using sensorTOOL.
Guides users on selecting the appropriate sensor for a specific channel in the settings.
Step-by-step guide for performing the dark reference procedure for accurate measurements.
Instructions on how to position the target centrally within the measuring range for optimal results.
Details how to choose and apply measurement presets for different target surfaces.
Procedures for checking the video signal, adjusting exposure, and switching between sensor channels.
Tips on adjusting measurement dynamics for improved signal quality and accuracy.
Guides on perpendicular alignment of the sensor and positioning the target for distance measurement.
Describes the elements and functions of the distance measurement web page display.
Covers pausing, saving, scaling, and displaying data on the chart.
Explains how to interpret signals via mouseover, bar charts, and signal visibility.
Details how thickness is derived from two surface reflections and distance calculations.
Guides on selecting the thickness preset and specifying target material properties.
Explains how to interpret the video signal, noting two peaks for transparent materials.
Describes how to view calculated distances, thickness, and optional intensities on the chart.
Details the baud rate, data format, and termination for the RS422 interface.
Explains Ethernet transmission rates and data transfer protocols for measurement values.
Describes how to select and output data for RS422 and Ethernet interfaces.
Guides on setting the gateway and assigning a new IP address for network connection.
Instructions for saving settings, returning defective parts, and contacting MICRO-EPSILON.
Details the 12-month warranty period, repair policy, and exclusions for material defects.
To Next Page