2.2 Model Overview
The cameras of the TIM series are available in the following basic versions:
Model Type Temperature range Spectral range Frame rate Typical applications
TIM 160 IR -20 to 900 °C
200 to 1500 °C
(optional)
7.5 - 13 μm 120 Hz Surface measure-
ments in industrial
application
TIM 200 /
TIM 230
BI-SPEKTRAL -20 to 900 °C
200 to 1500 °C
(optional)
7.5 - 13 μm 128 Hz Synchronous recor-
ding of VIS and IR
videos and images
TIM 400 /
TIM 450
IR -20 to 900 °C
200 to 1500 °C
(optional for TIM 400)
7.5 - 13 μm 80 Hz Real-time thermo-
graphic images in
high speed; Detec-
tion of smallest tem-
perature differences
(TIM 450)
TIM 640 IR -20 to 900 °C 7.5 - 13 μm 32 Hz Pin-sharp radiomet-
ric recordings in real
time
TIM G7 IR 200 to 1500 °C 7.9 μm 80 Hz/ 27 Hz Measurement of
glass (with Line-
Scanning mode)
TIM G7 VGA 32 Hz
TIM M-1 IR 450 to 1800 °C 0.92 - 1.1 μm Up to 1 kHz Measurement of
metallic surfaces,
graphite or ceramics
with short wave-
lengths
TIM M-05 900 to 2000 °C 500 - 540 nm
To Next Page
Loading...
