3. Delivery
3.1 Unpacking
3.1.1 Standard Version
1 thermoIMAGER TIM inclusive 1 lens
1 USB cable (1 m
1
)
1 Table tripod
1 Process interface cable inclusive terminal block (1 m)
1 Software package TIM Connect
1 Instruction manual
1 Aluminum case
thermoIMAGER TIM 200 / TIM 230 only: Focusing tool for VIS camera
3.1.2 TIM Thermal Developer Kit
1 thermoIMAGER TIM 160 or TIM 200
3 lenses (23 °, 6 ° and 48 °, inclusive calibration certificate)
1 USB cable (1 m
1
and 10 m)
1 Tripod (20 - 63 cm)
1 Process interface cable inclusive terminal block (1 m)
1 Software package TIM Connect
1 Instruction manual
1 Aluminum case
thermoIMAGER TIM 200 / TIM 230 only: Focusing tool for VIS camera
Check the delivery for completeness and shipping damage immediately after unpacking.
In case of damage or missing parts, please contact the manufacturer or supplier.
1) The camera plug of USB cable (1 m) does not feature an IP 67 protection class. For industrial applications
there are cables with IP 67 available, starting at 5 m.
To Next Page
Loading...
