CAN BUS ANALYZER
USER’S GUIDE
2009-2022
Microchip Technology Inc. and its subsidiaries DS50001848D-page 5
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
Chapter Name. Items discussed in this chapter include:
• Document Layout
• Conventions Used in this Guide
• Recommended Reading
• The Microchip Website
• Product Change Notification Service
• Customer Support
• Document Revision History
DOCUMENT LAYOUT
This user’s guide describes how to use the Chapter Name as a development tool to
emulate and debug firmware on a target board. The topics discussed in this preface
include:
• Chapter 1. “Introduction”
• Chapter 2. “Installation”
• Chapter 3. “Using the PC GUI”
• Appendix A. “Error Messages”
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our website
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level
of the document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE on-line help.
Select the Help menu, and then Topics to open a list of available on-line help files.
To Next Page
Loading...