2021 Microchip Technology Inc. DS00003118C-Page 59
AN3118
C.2 Selecting DSP Parameters
1. Perform all the steps from B.2 “Customizing
DSP Parameters”.
2. Select “I
2
S Mode” as Slave mode to configure
the I
2
S for Client mode, as illustrated in the fol-
lowing figure.
FIGURE 62: I
2
S IN CLIENT MODE
C.3 Creating Config *.HEX
For the procedure to create the *.HEX file, refer to B.3
“Creating *.HEX File”.
To Next Page
Loading...
