2016-2023 Microchip Technology Inc. DS50002489G-page 45
RN4870/71
The UKCA mark above is printed on the module itself
or on the packing label.
Additional details for the label requirement are avail-
able at:
https://www.gov.uk/guidance/using-the-ukca-mark-
ing#check-whether-you-need-to-use-the-new-ukca-
marking.
11.9.2 UKCA DECLARATION OF
CONFORMITY
Hereby, Microchip Technology Inc. declares that the
radio equipment type RN4870/71 is in compliance with
the Radio Equipment Regulations 2017.
The full text of the UKCA declaration of conformity for
this product is available (under Documents > Certifica-
tions) at:
https://www.microchip.com/en-us/product/RN4870
https://www.microchip.com/en-us/product/RN4871
11.9.3 APPROVED ANTENNAS
For RN4870, the approval is received using the
antenna listed in Figure 8-1.
For RN4871, the approval is received using the
antenna listed in Figure 8-2.
11.9.4 HELPFUL WEBSITES
For more information on the UKCA regulatory approv-
als, refer to the https://www.gov.uk/guidance/placing-
manufactured-goods-on-the-market-in-great-britain
11.10 Other Regulatory Jurisdictions
Should other regulatory jurisdiction certification be
required by the customer, or the customer needs to
recertify the module for other reasons, a certification
utility is available. For further regulatory certification
utility and documentation, contact your local Microchip
Technology sales office.
11.11 Other Regulatory Information
• For information about other country jurisdictions
not covered here, refer to:
http://www.microchip.com/design-centers/
wireless-connectivity
• Should other regulatory jurisdiction certification be
required by the customer, or the customer needs
to recertify the module for other reasons, contact
Microchip for the required utilities and
documentation.
Downloaded from Arrow.com.
To Next Page
Loading...
Need help?
General
