MANUAL.LM20 Revision C January 2023 Page 2 of 52
Important Information
◊ This equipment is intended to operate between 50°F-80°F (10°C - 26°C).
◊ The Microfluidizer processor is NOT designed to operate in an environment that contains explosive
fumes or other flammable or hazardous conditions.
◊ This system is capable of normal operation under voltages listed on nameplate.
◊ Equipment is capable of operation within a humidity range of 30% to 80% (noncondensing).
◊ Equipment is capable of operation at altitudes up to 1000M above sea level.
◊ Wear appropriate personal protection devices when operating and servicing equipment.
◊ Read and understand this manual before operating equipment. Contact Microfluidics Customer
Service with any questions.
◊ Equipment must be properly maintained and serviced.
To Next Page
Loading...