Microfluidics Microfluidizer LM20 - Model Specifications

MANUAL.LM20 Revision C January 2023 Page 7 of 52
Model Specifications
Maximum Product Process Pressure (LM20-20)
20,000 psi (1,379bar)
Maximum Product Process Pressure (LM20-30)
30,000 psi (1,585bar)
Process/Hydraulic Pressure Ratio
21 : 1
Plunger Stroke Length
2.5" (6.35cm)
Plunger Seal Material
UHMWPE
Plunger Diameter
0.437” (1.1cm)
Approx. Stroke Displacement
0.375 in3 (6.0mL)
Min. Product Inlet Pressure
Gravity
Approximate Unit Dimensions (LxWxH)
26" x 33" x 23"
(66cmm x 84cm x 58cm)
Approximate Unit Weight
230lbs (104kgs)
Check Valve Torque
See Drawings
Electrical Supply (3 Phase)
208-230/460V, 60Hz OR
190-220/380-415V, 50Hz
Noise Level
<75dB TWA
Hydraulic Oil Capacity
1.25 Gal (4.7L)
Hydraulic Accumulator Nitrogen Charge (LM20-20)
1100 psi (75 bar)
Hydraulic Accumulator Nitrogen Charge (LM20-30
1400 psi (96.5 bar)
Maximum Hydraulic Oil Temperature
150 °F (65°C)
Minimum Sample Size (approximate)
12 mL
Maximum Ambient Air Temperature
50 – 80°F (10 - 26°C)