EasyManua.ls Logo

Microgreen Power Pak - Safety Information; General Safety Precautions

Microgreen Power Pak
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
Industrial equipment metal halide lamps, high-pressure sodium lamps.
Home entertainment electronics TVs, VCRs, video games, stereos, musical instruments, satellite
equipment.
4.2 Features
Easy to install & operate
ULc certified for safest possible operation
Designed to operate in harsh environments
Compatible with both linear & non-linear loads
Separate 15A fused AC output receptacles
Low DC voltage supports home & office appliances (3kW model only)
DC start & automatic self-diagnostic function
AC charging (from grid/generator) and DC charging (from solar panels) available
Powerful battery charge current, selectable from 20% - 100%
High efficiency design & PowerSaver mode to conserve energy
Battery priority mode to designate the UPS configuration
Battery recover point, dedicated for renewable energy systems: 11.5 VDC (MINI), 21 VDC (COMPACT), 42
VDC (GRANDE)
8 pre-set battery type selector, plus de-sulphation (for flooded lead acid batteries)
4-step intelligent battery charging with power factor correction
8ms typical transfer time between utility & battery to ensure power continuity
15s delay before transfer when AC resumes to protect load when used with a generator
Supports a wide range of batteries such as lead acid, AGM, deep-cycle, and lithium.

Other manuals for Microgreen Power Pak