To Next PageTo Next Page
Need help?Do you have a question about the Microhard Systems pMDDL2450 and is the answer not in the manual?
Covers warranty terms, disclaimers, indemnification, and manual overview.
Details FCC and Industry Canada compliance requirements for the device.
General introduction, performance features, and key capabilities of the pMDDL.
Details electrical, environmental operating conditions, and physical dimensions.
Guides through initial setup, auto/manual master-slave configuration, and testing.
Describes OEM module, enclosed units, development board, their features, specs, and connectors.
Covers Web UI access, system, network, wireless, firewall, and serial port settings.
Covers network testing tools, user management, SNMP, discovery, and logout.
Explains AT commands, syntax, and supported commands via Telnet.
Covers network topology, path calculation, antenna selection, and installation.
Includes serial interface details, firmware recovery, schematics, and FAQs.
Covers warranty terms, disclaimers, indemnification, and manual overview.
Details FCC and Industry Canada compliance requirements for the device.
General introduction, performance features, and key capabilities of the pMDDL.
Details electrical, environmental operating conditions, and physical dimensions.
Guides through initial setup, auto/manual master-slave configuration, and testing.
Describes OEM module, enclosed units, development board, their features, specs, and connectors.
Covers Web UI access, system, network, wireless, firewall, and serial port settings.
Covers network testing tools, user management, SNMP, discovery, and logout.
Explains AT commands, syntax, and supported commands via Telnet.
Covers network topology, path calculation, antenna selection, and installation.
Includes serial interface details, firmware recovery, schematics, and FAQs.
General| Frequency | 2.4 GHz |
|---|---|
| Interface | PCI |
| Connector Type | RP-SMA |
| Operating System Support | Windows, Linux |
| Storage Temperature | -40°C to +85°C |
| Wireless Standards | 802.11b/g |
| Power Requirements | 3.3V DC |
