Microhard Systems pMDDL2450 - Page 108

© Microhard 108
5.0 AT Command Line Interface
Wireless (Radio) AT Commands
AT Command Description Syntax Effect
AT+MWRADIO Get/Set radio status, On or Off AT+MWRADIO[=<Radio>]
<Radio>
0 - Off
1 - On
AT&W
AT+MWDISTANCE Get/Set radio Wireless Distance AT+MWDISTANCE[=<Distance>]
<Distance>
1 - 200000 in meter
AT&W
AT+MWTXPOWER Get/Set radio Tx power AT+MWTXPOWER[=<Tx Power>]
<Tx Power>
7 - 7 dbm
8 - 8 dbm
9 - 9 dbm
10 - 10 dbm
11 - 11 dbm
12 - 12 dbm
13 - 13 dbm
14 - 14 dbm
15 - 15 dbm
16 - 16 dbm
17 - 17 dbm
18 - 18 dbm
19 - 19 dbm
20 - 20 dbm
21 - 21 dbm
22 - 22 dbm
23 - 23 dbm
24 - 24 dbm
25 - 25 dbm
26 - 26 dbm
27 - 27 dbm
28 - 28 dbm
29 - 29 dbm
30 - 30 dbm
AT&W
AT+MWBAND Get/Set radio channel bandwidth AT+MWBAND[=<Channel Bandwidth>[,<Symbol Rate>]]
Available radio channel bandwidth for pMDDL mode
0 - 8 MHz
1 - 4 MHz
AT&W
AT+MWFREQ2400 Get/Set radio channel-frequency
(Options vary by channel bandwidth)
AT+MWFREQ2400[=<MHz Channel Frequency>]
<Channel Frequency> :
4 - 2405 MHz
.
.
.
78- 2479 MHz
AT&W
AT+MWMIMO Get/Set radio MIMO AT+MWMIMO[=<MIMO>]
<MIMO> :
0 - Off
1 - On
AT&W
AT+MWMCASTRT Get/Set radio Multicast Rate AT+MWMCASTRT[=<Multicast Rate>]
<Multicast Rate> : 0 - QPSK FEC 1/2
1 - QPSK FEC 3/4
2 - 16-QAM FEC 1/2
3 - 16-QAM FEC 3/4
4 - 64-QAM FEC 2/3
AT&W
AT+MWVMODE Get/Set radio mode AT+MWVMODE[=<Virtual Interface Mode>]
<Virtual Interface Mode> :
0 - Master
1 - Slave
AT&W
AT+MWVRATE Get/Set radio TX Rate AT+MWVRATE[=<Virtual Interface TX Rate>]
<Virtual Interface TX Rate> :
0 - auto (Recommended)
1 - 64-QAM 5/6 FEC
2 - 64-QAM 3/4 FEC
3 - 64-QAM 2/3 FEC
4 - 16-QAM 3/4 FEC
5 - 16-QAM 1/2 FEC
6 - QPSK FEC 3/4
7 - QPSK FEC 1/2
AT&W