Microsemi ATS-6501 T-Flex - 4395 A-10; 4395 B-10 10 Mhz Card; 4395 A-5; 4395 B-5 5 Mhz Card

DOC 6501_Release V
ATS-6501 Users Guide
29
[OK] 2014-04-29T23:44:47Z
To verify the settings use the settings hardware:slots:N:tsc4391:ports command (where N=Slot
#) to obtain the current streams settings for the 4391 card.
ATS-6501>settings hardware:slots:5:tsc4391:ports
[1]
[blanking] none
[enabled] true
[stream] 3
[2]
[blanking] none
[enabled] true
[stream] 2
[3]
[blanking] none
[enabled] true
[stream] 3
[4]
[blanking] none
[enabled] true
[stream] 4
[OK] 2014-04-29T23:45:58Z
2.4.2.5 4395A-10 / 4395B-10 10MHz Card
No programming is required for these modules. These modules will also work in any of the 6
card slots. To verify these cards are working properly use the status hardware:outputs:slots:N
command (N = slot number) to obtain the current status for a particular card.
ATS-6501>status hardware:outputs:slots:3
[ports]
[1]
[status] good
[2]
[status] good
[3]
[status] good
[4]
[status] good
[power] enabled
[type] 4395A-10
[OK] 2013-08-05T16:06:29Z
2.4.2.6 4395A-5 / 4395B-5 5MHz Card
No programming is required for these modules. These modules will also work in any of the 6
card slots. To verify these cards are working properly use the status hardware:outputs:slots:N
command (N = slot number) to obtain the current status for a particular card.
ATS-6501>status hardware:outputs:slots:4
[ports]
[1]
[status] good
[2]
[status] good