EasyManua.ls Logo

Microsemi ATS-6501 T-Flex - Testing SNMP3

Microsemi ATS-6501 T-Flex
222 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DOC 6501_Release V
ATS-6501 Users Guide
74
This command creates the user "myuser" with a password of "my_password" (and uses MD5 and
DES for protection). The ‘net-snmp-config’ script will also add a line to your snmpd.conf file to
let that user have read/write access to the agent. You may want to change this in your
snmpd.conf file (see the snmpd.conf manual page). Run net-snmp-config --help for more
information about it.
Start the agent and test your setup:
service snmpd start or /usr/local/sbin/snmpd or you can reboot the unit
Note: Wait a few seconds. It will start running in the background and return you to the shell
command prompt.
The tflex unit is configured to work in unidirectional ‘read-only’ mode. There are ‘gets’ and
‘traps’, but no sets. At this time the unit does not support transport layer secure SNMP. At this
time the unit does not support transport layer secure SNMP.
For hardened units, SNMPv2 should be disabled since there is no authentication needed to access
the SNMP information. The community group ‘tsc’ should be removed or commented out from
the /mod/etc/snmpd.conf file. Simply add a # in front of the
rocommunity tsc
line to comment
out the user group ‘tsc,’ thus disabling SNMPv2 access.
3.4.6.4 Testing SNMP3
The MIB files are loaded on the system and can be retrieved from the ATS-6501 using FTP. FTP
to the unit using user/password ftp, cd to mibs and get the file for the unit you are uing.
$ ftp 192.168.150.60
Connected to 192.168.150.60:21.
220 6511A_60 FTP server (Version 6.00LS) ready.
Name (192.168.150.60:21:km): ftp
331 Guest login ok, send your email address as password.
Password:
230 Guest login ok, access restrictions apply.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> cd mibs
250 CWD command successful.
ftp> ls
200 PORT command successful.
150 Opening ASCII mode data connection for '/bin/ls'.
total 2714
-rw-r--r-- 1 1001 1001 1251 Jul 21 19:36 ATS-6501-COMMON.mib
-rw-r--r-- 1 0 1001 223729 Jul 21 22:13 ATS-6501.mib 6501A
-rw-r--r-- 1 0 1001 226085 Jul 21 22:13 ATS-6501B.mib 6501B
-rw-r--r-- 1 0 1001 241870 Jul 21 22:13 ATS-6501BS.mib 6501B SAASM
-rw-r--r-- 1 0 1001 241869 Jul 21 22:13 ATS-6501SA.mib
-rw-r--r-- 1 0 1001 203803 Jul 21 22:13 ATS-6501XA.mib
-rw-r--r-- 1 0 1001 203804 Jul 21 22:13 ATS-6501XB.mib
-rw-r--r-- 1 1001 1001 1251 Jul 21 19:36 ATS-6511-COMMON.mib
-rw-r--r-- 1 0 1001 217199 Jul 21 22:13 ATS-6511.mib
-rw-r--r-- 1 0 1001 235285 Jul 21 22:13 ATS-6511B.mib
-rw-r--r-- 1 0 1001 237673 Jul 21 22:13 ATS-6511BR.mib
-rw-r--r-- 1 0 1001 235285 Jul 21 22:13 ATS-6511C.mib
-rw-r--r-- 1 0 1001 237673 Jul 21 22:13 ATS-6511CR.mib
-rw-r--r-- 1 0 1001 4379 Jul 21 22:13 TSC-COMMON.mib

Table of Contents

Related product manuals