Microsemi ATS-6501 T-Flex - Output Signals

DOC 6501_Release V
ATS-6501 Users Guide
89
[external]
[communications] N/A
[locked] true
[signal] present
[internal]
[locked] true
[timescale]
[clocks]
[Cesium1]
[1_pps_present_slot_4_port_1] true
[communications] N/A
[id] 1365
[Cesium2]
[1_pps_present_slot_4_port_2] true
[communications] N/A
[id] 1559
[hp5071]
[can_communicate] false
[lns]
[locked] true
[ntp]
[locked] true
[source] internal refclock
[ocxo_freq_control] 2
[OK] 2013-08-08T14:28:03Z
Reference_type = Cesium
[external] not monitored
[hp5071]
[can_communicate] false
[internal] locked
[lns] locked
[locked] true
[ocxo_freq_control] 0
R. If the ATS-6501 has a 4393A Card that is actively making measurements the system will
report those measurements as they are computed for each channel. The system will
update the status when the ptd_avg expires and the averaged values are computed.
[tic_measurements]
[channel]
[31] 1.317307692300000e-08
[32] 1.461538461500000e-08
[33] 1.432692307700000e-08
[34] 1.916666666700000e-08
S. The system will report when the status message was reported to the user.
[time] 2013-08-08-14:30:26
T. The [unit] will display the system network information, serial number, the startup time
(when NTP Locked), the uptime since the last power cycle, reboot, or restart and the
software version running on the system, and the time the status command was executed.
[network]
[MAC] 00:30:96:00:00:98
[broadcast] 192.168.150.255