Microtec UV6090 - 2.7 Platform Operation

MT-FP4060-UV Operating Manual
22
2.7 Platform Operation
2.7.1 Platform Operation
2.7.2 Control panel setting
2.7.2.1 Origin Setting
“Origin” is to set the printing start location. Any place on control panel can be set as origin.When the carriage assembly
is back to home position,screen will display“H 0mm V 0mm”.
“H 42mm V 0mm” means the origin location is
42mm horizontally and 0mm vertically away
from the home position. And “UNI-DIR”
means the print direction is Uni-direction
Power
Emergency
Power indicator
Printer Bridge down
Printer Bridge up
Pause
Cancel
Origin
Enter
Menu
Printing Quality
Cleaning
Testing