Microtest 6378 - Page 62

6–24
MEASUREMENT MODE
:MEAS:LOw-LIMit <real>
Set scale low limit.
Parameters:
The required low limit. No unit should
be supplied: the nominal unit is used.
Example: :MEAS:LO-LIM -5.0
will set a low limit of -5.0% of
nominal.
Response:
None.
:MEAS:LOw-LIMit?
Returns the current scale bar percentage
low limit.
Parameters:
None.
Response:
The current low limit in engineering
format.
Example: -.20000000E+01
indicating a high limit of -2.0% of
nominal.