Microtest 6378 - 6375 Series Specifications; Measurement Parameters; Test Conditions Overview; AC Drive Specifications

7–1
7. 6375 SERIES SPECIFICATION
Microtest reserves the right to change specification without notice
7.1 Measurement Parameters
Any of the following parameters can be measured and displayed:
DC Function
Resistance (Rdc).
AC Functions
Capacitance (C), Inductance (L), Resistance (R), Conductance (G), Susceptance (B),
Reactance (X), Dissipation Factor (D), Quality Factor (Q), Impedance (Z), Admittance (Y) and
Phase Angle ().
The following display formats are available:
Series or Parallel Equivalent Circuit
C+R, C+D, C+Q, L+R, L+Q
Series Equivalent Circuit Only
X+R, X+D, X+Q
Parallel Equivalent Circuit Only
C+G, B+G, B+D, B+Q
Polar Form
Z + Phase Angle, Y + Phase Angle
7.2 Test Conditions
7.2.1 AC Drive
7.2.1.1 Frequency Range
20Hz to 200KHz (6375)
20Hz to 500KHz (6376)
20Hz to 1MHz (6377)
20Hz to 5MHz (6378)
20Hz to 10MHz (6379)
Resolution: 5 digits
Accuracy of set frequency ±0.005%,