Microtest 6378 - Page 71

6–33
CALIBRATE MODE
:CAL:SC-TRIM <integer>
Perform short circuit trimming.
Parameters:
The required trim type.
1 Spot trim.
2 Up to 10kHz.
3 Up to 100kHz.
4 All frequency.
5 RDC
Example: :CAL:SC-TRIM 1
would perform a short circuit trim at the current frequency.
Response:
None.
:CAL:RES?
Returns the result of the most recent trim or calibration performed.
Parameters:
None.
Response:
The trim flag:
1 Calibration passed.
0 Calibration failed.
Example: 1
would indicate that the last trim or calibration was successful.