EasyManua.ls Logo

Midas M32R LIVE

Midas M32R LIVE
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Skip to content
Manuals+
User Manuals Simplified.
Digital Console for Live and Studio with 40 Input
Channels, 16 MIDAS PRO User Guide
Home » MIDAS » Digital Console for Live and Studio with 40 Input Channels, 16 MIDAS PRO User Guide
Contents [ hide
1 Digital Console for Live and Studio with 40 Input Channels, 16 MIDAS
PRO
2 Important Safety Instructions
3 Important information
4 Control Surface
5 Rear Panel
6 Main Display
7 Quick Reference Section
7.1 Editing Channel Strip LCDs
7.2 Using Buses
7.3 Matrix Mixes
7.4 Using DCA Groups
7.5 Sends on Fader
7.6 Mute Groups
7.7 Assignable Controls
7.8 Effects Rack
8 Firmware Updates & USB Stick Recording
9 Block Diagram
10 Technical Specifications
11 File Downloads
12 References
13 Related Manuals

Other manuals for Midas M32R LIVE

Question and Answer IconNeed help?

Do you have a question about the Midas M32R LIVE and is the answer not in the manual?

Midas M32R LIVE Specifications

General IconGeneral
TypeDigital Mixer
Channels40
Buses16
Sample Rate48 kHz
Inputs - Mic Preamps16 x XLR
Phantom PowerYes
A/D Resolution24-bit
Mic Preamps16
ConnectivityUSB
Display5" TFT display
Outputs - Main8
EQ Bands4-band
Effects TypesReverb, Delay, Chorus
Data I/OUltranet
USB1 x Type A, 1 x Type B
Computer ConnectivityUSB
I/O Expansion Slots1 x Slot (32-channel audio interface, or digital networking)
MIDI I/OIn/Out
Outputs - Other6 x 1/4" TRS, 2 x XLR (AES/EBU), 2 x 1/4" TRS (monitor)

Summary

Safety and Important Information

General Safety Instructions and Warnings

Covers electrical safety, proper usage, and environmental precautions to prevent shock and damage.

Control Surface Overview

Channel Strip Controls (Config, Gate, EQ)

Details controls for preamp gain, phantom power, phase, gate, dynamics, and equalization bands.

Channel and Bus Management Controls

Details main bus assignment, display interaction, layer selection, and channel strip functions.

Group, Bus, and Master Channel Controls

Describes controls for DCA groups, mix buses, matrices, and the master stereo mix bus.

Rear Panel Connectivity

Display Screen and Navigation

Quick Reference and Operations

Bus and Matrix Mix Setup

Details bus setup, pre/post fader options, and matrix mix configurations.

DCA Groups and Sends on Fader

Explains controlling channels with DCA groups and adjusting sends on faders.

Firmware Update and USB Recording Procedures

Steps to update firmware and record audio to a USB stick.

Technical Specifications

Processing and Performance Specs

Details internal processing capabilities, signal processing, and conversion specs.

Related product manuals