Midea 7NM30EO - Page 13

NOTE
1. Ensure that you always insert the accessories into the cavity the right way round.
2. Always insert the accessories fully into the cavity so that they do not touch
the appliance door.
3
2
5
4
3
2
1
4
1
Tilt protection
Accessories can be approximately pulled halfway out until they lock in place. The locking
function prevents accessories from tilting with the gravity of food and accessories
themselves while they get pulled out. Accessories should be inserted into cavity correctly
for the tilt protection.When inserting the wire rack, ensure the wire rack is onto the right
facing direction like the picture
1
3
.
When inserting the backing tray, ensure the backing tray is onto the right facing direction
like the picture
41
.
EN-12