Remove The Telescopic Runners
( take the left side for example, same for right side)
• Lift up one end of the telescopic runners hard.
• Lift up the whole telescopic runners and remove backward.
1
2
Change The Power Cord
Position A show the terminal box position on the back of the back outer case and it’s
closed.
Steps:
• cut off the power, use small flat screwdriver to open two snap 1
,
• use Phillips crew driver to take off screws 3, 4, 5 and 6.
• change the new power cord, fix the yellow/green wire on 3, brother wire on 4, blue
wire on 5.
• twist screw 6 closed the terminal box cover finish the changing.
terminal boxback outer case
A
power cord
brown {L}
blue {N}
yellow/green
21
6
3
5
4
2.
To Next Page
Loading...
