EasyManua.ls Logo

Midea 7NM30EO - Page 33

Midea 7NM30EO
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Removing The Door Cover
The plastic inlay in the door cover may become discolored. To carry out thorough
cleaning, you can remove the cover.
Remove the appliance door like instructed above.
Press on the right and left side of the cover.
Remove the cover.
After removing the door cover , that rest parts of the appliance door can be easily
taken off so that you can go on with the cleaning . When the cleaning of the appliance
door has finished , put the cover back in place and press on it until it clicks audibly
into place
Fitting the appliance door and close it.
While the appliance door is well installed, the door cover can also be taken o°, by this
time.
Removing the door cover means to set the inner glass of the appliance door free, the
glass can be easily moved and cause damage or injury.
As removing the door cover and inner glass means to reduce the overall weight of the
appliance door. The hinges can be easier to be moved when closing the door and you
may be trapped. Keep your hands away from the hinges.
Because of the 2 points above, we strongly recommend you not to remove the door
cover unless the appliance door removed. Damage caused by incorrect operation is not
covered under warranty.
Caution
EN-32

Related product manuals