Note:
1) Food to be avoided in sensor reheating.
a. Bread and other dry food, such as biscuits and cake.
b. Raw or uncooked foods.
c. Beverage and frozen food.
2) The oven cannot cook automatically when the temperature of the oven
cavity is high.
3) The reheat food can be covered with the lid. And the lid must have
venthole to emanate the steam. Sealed utensils must not be used.
4) During sensor cooking process, please do not open the oven door or
press “STOP/CANCEL“ key. Otherwise, the sensor will make mistakes.
5) The sensor reheat has different requests for different food.
Casseroles- Add 3 to 4 tablespoons of water, cover with a lid or vented
plastic wrap. Stir when time appears in the display window.
Canned foods-Empty contents into casserole dish or serving bowl,
cover dish with lid or vented plastic wrap. After reheating, let stand for a
few minutes.
Plate of food- Arrange food on plate; top with butter, gravy, etc. Cover
with lid or vented plastic wrap. After reheating, let stand for a few
minutes.
11.MEMORY FUNCTION
(1) Press “MEMORY” to choose memory 1-3 procedure. The screen will
display 1,2,3.
(2) If the procedure has been set, press “START/+30SEC.“ to begin the
procedure. Only one or two stages can be set
(3) If the procedure has not been set, after nishing the setting, press
“MEMORY” once to save the procedure and turn back to the former
state. If press START/+30SEC , it will start cooking at once and
save the procedure too.
Example: To set the following procedure as the second memory, that is
memory 2. To cook the food with 80% microwave power for 3 minutes and
20 seconds.
The steps are as follow:
a. In waiting states, press “MEMORY” twice, stop pressing until the
screen displays “2”.
b. Press “COOK TIME“ once, then press “3”,”2”,”0” in order.
c. Press “POWER LEVEL“ once, ”PL10” displays, then press “8” and
“PL8” displays.
d. Press “MEMORY“ to save the setting and turn back to the waiting
state; If you press “START/+30SEC.“ the procedure will be saved and
operated as the memory2.
e. If the electricity is not cut off, the procedure will be saved all the time.
If it is, the procedure will need to be reset.
f. When you want to run the saved procedure, in waiting states, press
“ ” twice, screen displays “2”, then press “START/+30SEC.“
to start cooking.
Note:
Auto menu cannot be set in memory function.
“
”
MEMORY
To Next Page
Loading...
