Midea DLCERAA24AAK User Manual

26 32808001101
Specifications subject to change without notice.
DIAGNOSIS AND SOLUTION
EEPROM Parameter Error Diagnosis and Solution (E0/F4)
Error Code E0/F4
Malfunction decision conditions Indoor or outdoor PCB main chip does not receive feedback from the EEPROM chip.
Supposed causes
S Installation mistake
S PCB faulty
Troubleshooting
Yes
Replace the indoor/outdoor
main PCB.
Power off, then restart the
unit 2 minutes later.
EEPROM: A read−only memory whose contents can be erased and reprogrammed using a pulsed voltage. For the EEPROM chip location, please
refer to Fig 30 and Fig. 31.
Fig. 30 - Indoor PCB
Fig. 31 - Outdoor PCB
NOTE: The two pictures above are for reference only and they may differ from the actual unit.

Midea DLCERAA24AAK Specifications

General

Type	Split Air Conditioner
Inverter	Yes
Energy Efficiency Ratio (EER)	3.5
Power Supply	220-240V, 50Hz
Refrigerant	R32
Cooling Capacity	24000 BTU/h
Operating Temperature (Cooling)	18°C to 43°C