54
NOTE: This setting is unavailable in the FAN or OFF modes.
NOTE: The weekly timer setting can be returned to the previous step by pressing BACK. The current
setting is restored.
The controller will not save the weekly timer settings if there is no operation within 30 seconds.
NOTE: This setting is unavailable in the AUTO, DRY or OFF modes.
Press “ ” or “ ” to select the day of the week and then press CONFIRM.
Press “ ” or “ ” to select the setting time. The setting time, mode,
temperature and fan speed appear on the LCD. Press CONFIRM to enter the
setting time process.
Press “ ” or “ ” to set the time, then press CONFIRM.
Press “ ” o r “ ” to set the operation mode then press CONFIRM.
Press “ ” or “ ” to set the room temperature,then press CONFIRM.
Press “ ” or “ ” to set the fan speed then press CONFIRM.
2. Day of the week setting
3. ON timer setting of timer setting 1
4. Time setting
5. Operation mode setting
6. Room temperature setting
7. Fan speed setting
8. Different scheduled events can be set by repeating steps 3 through 7.
9. Additional days, in a one week period, can be set by repeating steps 3 through 8.
ex.Tuesday time scale 1
IMPORTANT: Up to 8 scheduled events
can be set on one day.
Various events can be scheduled in
either MODE, TEMPERATURE and FAN
speeds.
To Next Page