Midea DUCMI170IHB - Page 59

57
14.Technical indication and requirement
15.Queries and settings
EMC and EMI comply with the CE certifcation requirements.
When the air conditioning unit is switch machine, Long press
“COPY” for 3 seconds , frst display P:00, if connected to an indoor unit, display
P:00, if connected to multiple indoor units, press “ ”or “ ”to display P:01, P:02,
and then press “Confrm” to enter the query indoor unit Tn(T1~T4) temperature and
fan fault(CF), press“ ”or “ ”to select.
Not operating keys 15 seconds or press “Back” or press “ON/OFF”drop out of
query temperature.
When the air conditioning unit is of, into the query function of temperature,
press“ ” or “ ”to select SP, press “Confrm” to adjust the static pressure value.
When the air conditioning unit is of, into the query function of temperature, press
“ ”or “ ”to select AF, press “Confrm” into test mode, press “Back” or press
“ON/OFF” or press “Confrm”drop out of test mode.In AF mode, 3~6 minutes test
completion automatically exits, if the test process, press “Back” or press “ON/OFF”
or press “Confrm” , the test exits will be interrupted.
When the air conditioning unit is of, into the query function of temperature, press
“ ”or “ ”to select tF.
The compensation temperature Range : -5~5°C.
Press “Confrm” into setting state, press“ ”or “ ”to select the temperature,
then press “Confrm” to complete it.
When the air conditioning unit is of, into the query function of temperature, press
“ ”or “ ”to select tyPE.
Press “Confrm” into setting state, press“ ”or “ ”to select the type, then press
“Confrm” to complete it.
When the air conditioning unit is of, into the query function of temperature, press
“ ”or “ ”to select tHI or tLo.
Press “Confrm” into setting state, press“ ”or “ ”to select the temperature, then
press “Confrm” to complete it.
The highest setting temperature range : 25~30°C
The lowest setting temperature range: 17 ~24°C.
: compensation temperature
Follow me function temperature compensation
Set the highest and lowest temperature values
CH:
CC: NA:
HH:
: Highest value setting function.
: Minimum value setting function.
38