Error
Code
Unit
Action
Causes Explanation
E20
Pump open circuit
Unit will close
valve and stop
with Error code
display
Pump
Check the pump or the and the inner wire
of the pump
E21
Washer Won‘t
Drain. Or drain
timeout
Unit will close
Pump and stop
with Error code
display
Drain Hose
If the washer won't drain water check the
drain hose. Be sure the hose did not get
kinked behind the washer. Also, remove
the hose from the pump and check it for
obstructions.
Pump
If the washer won't drain water the drain
pump might be defective. It's also
common for a small sock or other article
of clothing to get caught in the drain
pump or in the drain hose. Check both for
an obstruction before replacing the pump.
PCB Check PCB
4. MALFUNCTION CODES AND EXPLANATIONS
20
To Next Page
Loading...
Need help?
General
