Midea HS-338FWEN-W

9
3.6 Installation of handle
Note: Figures in the user manual are only for reference. The actual product may differ slightly.
The refrigerator must be disconnected from the source of electrical supply before attempting the
installation of accessory.
Schematic diagram of handle installation
Design sketch of installed handle
①
1） Remove the insert pin ①
①
2)Adjust the handle ③ to the installing hole
and tighten screw ②.
②
③
3Cover the nut cap ④ of handle hole
④
(Pictures and objects are not consistent, in order to prevail in kind)