EasyManua.ls Logo

Midea MDD160-V052/F01-US1305

Midea MDD160-V052/F01-US1305
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Service manual for Dryer Machine Midea America Company
-------------------------------------------------------------------------------------------------------------------------------------------------------
9
2. HOW TO USE
2.1 Controls and function
1. Power button
Press once to turn your dryer on. Press again to turn your dryer off. If the dryer is left on for more
than10 minutes without any buttons being pressed, the unit will automatically turn OFF.
2. Cycle selector
Select your desired cycle for the type of load. The cycle you select determines the heat control for
the cycle. The Normal, Delicates, Bulky, Heavy duty, Towels, Casual and Sanitize cycles are
Sensor Dry cycles. The Quick Dry, Time Dry and Air fluff cycles are Manual Dry cycles.
3. Digital display
The LED digital display will show your remaining time for cycle selected. The LED will show
selected delay time when setting the delay time.
4. Time adjust buttons
This buttons are effective only for Manual cycles. Push this button to change the drying time you
prefer. Push the buttons to get the setting time you desire.
5. Wrinkle prevent button
Press once to add the Wrinkle Prevent step into the operating program. Press again to cancel
selection. Wrinkle Prevent provides approximately 90 minutes of intermittent tumbling in unheated
air at the end of the cycle to reduce wrinkling. The load is already dry, and can be removed at any
time during the Wrinkle Prevent cycle.
6. Start/pause button
Press once to start the program. Press again to pause the program. You can’t change any setting
except add a garment. Press once again to restart the program.
7. Cycle status lights
The relative light will be lit when the dryer is in its drying program, say the cooling LED will lit when
the dryer is operating in cooling down process. When the whole program is finished, the Clean
Filter light will flash to remind you to clean the filter.
8. My cycle
Press and hold for 3 seconds to remember your favorite drying cycle. Press once to load your
favorite cycle setting.
9. Dryness level button

Related product manuals