Oven Lights:
CAUTION
SHOCK, BURN, AND LACERATION HAZARDS
• Disconnect power to oven and wait until oven is cool before attempting to
service light bulbs.
• Handle glass cover carefully to reduce risk of breakage. If lamp cover is
difficult to remove, do not force. Contact a qualified service provider for
repairs.
• Do not operate oven without glass cover in place.
The ovens light is a standard 40W-watt
(G9 Halogen) appliance bulb. Before
replacing, make sure the oven and
cooktop are cool and the control
knobs are off.
HOW TO REPLACE OVEN LIGHT
1. Disconnect the power supply.
2. Turn the glass cover counter
clockwise to remove.
3. Pull out the bulb straight out of the
socket.
4. Replace bulb by pushing in, then
reinsert glass cover clockwise
5. Reconnect power.
CLEANING METHOD FOR STAINLESS STEEL
• Use a stainless-steel cleaner or a mild cleaner recommended on stainless-
steel surfaces.
• Wipe cleaner with a soft cloth in the direction of the grain to avoid damage.
• Remove any excess with a clean and dry, lint-free cloth.
CLEANING THE OVEN DOOR EXTERIOR
• Clean with a mild soap and warm water.
• Wipe clean with a dry soft cloth.
To Next Page
Loading...
