5.While the probe mode is in operation, the display will alternate between
the oven set temperature and the probe temperature reading.
6.
7.
Modifying the probe temperature:
1.
2.On Numeric Keypad Input models, the desired food temperature cannot
be modified. The bake mode must be ended by pressing the "CLEAR/OFF"
key and re-entering the bake mode and desired food temperature as
described above.
Press "CLEAR/OFF" to clear the signal or to exit the probe bake mode early.
On Control Input Knob models with a separate "PROBE" key on the oven
control, pressing this key allows user to change the desired food
temperature at which the bake cycle will end.
3.Select the baking mode ("BAKE," "CONV BAKE," or "CONV ROAST"),
select oven temperature, and press the "START/ENTER" button or click
the Control Input Knob (if present).
Once the oven probe reaches the desired temperature, the display will
flash and sound an alert to indicate the bake mode has ended. Oven will
either turn off or revert to "KEEP WARM" mode, depending on the settings.
(See Control Settings section of this manual for instructions on changing
settings.)
flash, indicating that the desired food temperature is to be set next. Adjust
food temperature to the desired value and press the "START/ENTER"
button or click the Control Input Knob (if present).
PREPARING
FOR FIRST USE
COOKTOP
OPERATION
OVEN
OPERATION
CONTROL
SETTINGS
TROUBLESHOOTING
CLEANING AND
MAINTENANCE
37
4.Once oven temperature has been set, the blue text and probe icon will
SAFETY
INSTRUCTIONS
To Next Page
Loading...
