Midea MGS30S2AST

Cooktop Burners:
PREPARING
FOR FIRST USE
COOKTOP
OPERATION
OVEN
OPERATION
CONTROL
SETTINGS
TROUBLESHOOTING
CLEANING AND
MAINTENANCE
47
2.
3.
Replace burner and burner caps onto cooktop at correct locations and in
correct orientation. See images below for proper assembly and alignment.
Directions:
1.
Remove cap from burner and wash with warm soapy water. Do not wash
in dishwasher. For stubborn soils, a plastic scouring pad or stiff nylon
brush may be used. Dry thoroughly.
Remove burner from cooktop. Dump out any debris found inside burner.
Wash with warm soapy water. Do not wash in dishwasher. For stubborn
soils, a plastic scouring pad or stiff nylon brush may be used. Check that
no debris remains inside burner ports (openings around perimeter of
burner top). Dry thoroughly.
4.
Clean stainless steel surfaces with general purpose stainless steel
cleaner. Follow instructions provided with cleaning compound. Rub in
direction of brushed finish. Repeat as necessary to remove all soils. Dry
thoroughly to prevent corrosion and water marks.
5.
Clean enameled surfaces and around burner bases with general purpose
kitchen cleaner. Follow instructions provided with cleaner. Repeat as
necessary to remove all soils. Dry thoroughly to prevent corrosion and
water marks.
Wash griddle and grates by hand with warm soapy water. To prevent
corrosion, do not soak in water. Do not wash in dishwasher. For stubborn
soils, a plastic scouring pad or stiff nylon brush may be used.
6.
Clean burners one at a time to avoid mixing up burner locations and/or
burner caps.
BURN, INHALATION HAZARDS
Follow instructions carefully to ensure burners are located and assembled
correctly for proper combustion.
CAUTION
SAFETY
INSTRUCTIONS