Reinstalling door:
PREPARING
FOR FIRST USE
COOKTOP
OPERATION
OVEN
OPERATION
CONTROL
SETTINGS
TROUBLESHOOTING
CLEANING AND
MAINTENANCE
52
1.
Holding door from the sides, align door so that hinges slip back into
openings.
2.
Rotate door until 2-3 inches from being fully closed, allow door to drop
into notches on hinges.
3.
Rotate door out until fully open.
4.
Flip the hinge locking mechanism back up and away from the door.
5.
Check that door opens and closes correctly.
6.
If door does not operate correctly, re-engage locking mechanisms,
remove door, and reattempt installation.
SAFETY
INSTRUCTIONS
To Next Page
Loading...
