Midea MH-SU65-RN8L

RECORD TABLE OF TEST RUN AND MAINTENANCE
Table 11-2
Model: Code labeled on the unit:
Customer name and address: Date:
RECORD TABLE OF ROUTINE RUNNING
Table 11-3
Model: Date:
Weather: Operation time: Startup ( ) Shutdown ( )
Outdoor
temperature
Compressor
Air temperature
of air-side heat
exchanger
Temperature
of chilled water
or hot water
Current of cooling water
pump or hot water pump
Note:
Indoor temperature
Dry bulb
Wet bulb
°C
°C
°C
MPa
MPa
V
A
°C
°C
°C
°C
A
High pressure
Low pressure
Voltage
Current
Inlet
(dry bulb)
Outlet
(dry bulb)
Inlet
Outlet
1. Check temperature of chilled water or hot water
Inlet ( ) Outlet ( )
2. Check air temperature of air-side heat exchanger:
Inlet ( ) Outlet ( )
3. Check refrigerant suction temperature and superheating temperature:
Refrigerant suction temperature: ( ) ( ) ( ) ( ) ( )
Superheating temperature: ( ) ( ) ( ) ( ) ( )
4. Check pressure:
Discharge pressure: ( ) ( ) ( ) ( ) ( )
Suction pressure: ( ) ( ) ( ) ( ) ( )
5. Check running current: ( ) ( ) ( ) ( ) ( )
6. Whether unit has been through refrigerant leakage test? ( )
7. Whether there is noise on all the panels of unit? ( )
8. Check whether the main power source connection is correct. ( )
37