Turn on and clean
1. Put the machine into standby mode with the foot on the floor brush and the handle pulled diagonally.
Modes and Application Scenarios
2. Turn the machine ON or OFF by pressing the
ON/OFF key briefly. (There will be a 3s delay
when the machine is switched off; please do
not repeat the operation.)
3. Standard mode by default; press on the Mode key
to switch between high mode and fast suction mode.
ON/OFF key
Mode key
Status
Standard Mode
High Mode
Fast Suction Mode
Suction
Low
High
High
Application
Cleaning of lightly stained floors
Cleaning of stained floors
Cleaning of dry rubbish or
residual water on the floor
Water Volume
Small
Large
/
To Next Page
Loading...
