EasyManua.ls Logo

Midea MVC-X6 - LED Instructions

Midea MVC-X6
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Float
Waste water detection alarm
When the waste water reaches the MAX line and the float floats up to block the suction port, and the
self-cleaning key LED flashes blue. Please clean the waste water tank in time before using it.
LED Instructions
Note:
1. The machine must not be tilted so much that the brush is lifted off the ground, as this will cause
waste water to be sucked in by the vacuum motor and then sprayed out and back onto the ground.
2. It is prohibited to suck in larger pieces of rubbish when the machine is working, so as not to block
the suction port or the pipe and cause a weakening of the suction power or stop the machine from
working properly.
3. Before handling or transporting the machine, make sure that both the clean water tank and the
waste water tank are emptied of water, otherwise the machine will be damaged by water ingress.

Related product manuals