Midea V4 Plus

MCAC-VTSM-2016-04 R410A DC Inverter VRF V4 Plus W Series 50Hz
Installation 179
WARNING:
It is needed to block the water outlet in the side which do not need to be connected with drainage pipes with water outlet plug and
seal ring, otherwise the condensed water produced during the system operation will drain near the installation place, to cause
inconvenience.
3.4 Installation of the main unit water pipelines
Symbols description
Gate valve
Y-shape filter
Pressure gage
Thermometer
Water flow switch
Motorized valve
Flexible connection
Drainage valve
Main unit side water pipelines connecting figure (Recommended)