R410A DC Inverter VRF V4 Plus Individual Series 50Hz MCAC-VTSM-2014-04
62 Selection Procedure
2.4 Conclusion
Generally, we think this result is acceptable, so we can think we have accomplished the calculation. But if you
think this result is not acceptable, you can repeat the above process.
Remark: In this sample, the other capacity modification indexes don’t be considered and are assumed as 1.0.
For more details about the effect factor such as outside ambient/inside ambient DB/WD, please refer to the
performance table of indoor and outdoor units.
To Next Page
Loading...
