Test Program
During test program running you can press Program button to jump into
next step except inlet valve step
,
().
How to activate Test Program
In order to check the operation of components of appliance and find out the malfunction, we
designed this program for technician.
How to activate
Test Program
With door opened,
Program+ Power
Start Test
Program
Close the door
Jump into next
step
Program
E1
E3
E4
E6
E7
Test Program Operation
19
To activate test program, with the door opened and within 60s after power on,
hold down the Program button and press the POWER button until the
machine enter into Test Program.
Then close the door to start the Test Program.
E1
E3
E4
E6
E7
To Next Page
Loading...
