Midland ct210 - Scrambler and Backlight Configuration

ENGLISH
11
use the fast menu: press the
key and then and
follow the procedure above described starting from point 3.
Scrambler on/off
To activate the scrambler, follow this procedure:
1. press the
button;
2. turn the Encoder knob until ‘SCRM’ (menu 06) is
displayed
3. push
;
4. turn the Encoder knob and activate/deactivate the scrambler
(ON = activated; OFF = deactivated);
5. press
;
6. press twice the
knob to exit.
To activate/deactivate rapidly this function, you can also use
the fast menu: press the
key and then and follow
the procedure above described starting from point 3.
Backlight on/off
To select the LCD backlight:
1. press the
button;
2. turn the Encoder knob until ‘LED’ (menu 07) is displayed
3. push
;
4. turn the Encoder knob and activate/deactivate the function:
3 different options are available (AUTO, ON, OFF);
5. press
;
6. press twice the
knob to exit.
To activate/deactivate rapidly the backlight, you can also use
the fast menu: press the
key and then and follow
the procedure above described starting from point 3.
Select the backlight colour
To select the backlight colour:
1. press the
button;
2. turn the Encoder knob until ‘LIGHT’ (menu 08) is
displayed
3. push
;
4. turn the Encoder knob and choose the desired colour (3
different colours are available);
5. press
;
6. press twice the
knob to exit.
To select it rapidly, you can also use the fast menu: press