ER300 Owner’s Manual
midlandusa.com
Page 11
ER300 Settings Menu
Accessing and Using the Menu
• To access the ER300’s settings menu, press and hold the WX
ALERT button for 3 seconds.
• To adjust the settings use the TUNE up and down buttons.
• To go to the next menu option, press the WX ALERT button.
• To exit the menu, toggle through all the menu options or wait 30
seconds and the menu will time-out.
Setting the Clock
• To set the clock, press the WX ALERT button and select the 24
hour or 12 hour clock.
• Press the WX ALERT button to adjust the time and again to
adjust the minutes.
Backlight Option
The ER300 has 3 backlight settings:
• OFF: The backlight will always be off.
• ON: The backlight will always be on.
• Default: The backlight will turn on for 5 seconds when a button
is pressed then turn off.
Weather Channel Display Option
The ER300 has 2 weather channel display options:
• Default: Displays weather channel frequency.
• Channel: Displays channel numbers.
To Next Page
Loading...
