10
light tells you that a watch has been issued for your area by
the National Weather Service.
6. “ADVISORY” Alert Status Light. This yellow LED
Indicator light tells you that a statement or emergency has
been issued for your area by the National Weather Service.
7. AM/FM radio Am or FM selector button. Switches
between AM & FM bands of the broadcast radio. (Weather
Monitor and AM/FM radio must both be turned on.)
8. RADIO AM/FM radio on/off button. Turns FM/AM
(broadcast) radio on & off. (The weather service channel is
monitored for alerts whether or not the FM/AM radio is on.)
9. OFF Weather Monitor unit on/off dial & volume control.
This is the MIDLAND Weather Monitor volume control
and the main power switch. Click unit on & adjust to
desired listening level. (Only the clock is active when this
dial is set to off.)
10. ALARM OFF/ON switch. Enables and disables clock
alarm function.
11.* MENU (programming) menu mode activation button. Press
to activate programming mode. (Use directional arrows to
move through programming menu options.)
12.* SELECT (programming) select & confirm option button.
Press to confirm your selection.
13.* Arrows (programming) buttons – up, down, right & left.
Use directional arrows to program the MIDLAND Weather
Monitor menus. (This unit programs with menus similar to
a TV remote control.) Note: you can also use the arrows to
review previous alerts when in normal display mode.
To Next Page
Loading...
